Linksys e1200 setup download mac

Contents

  1. linksys e1200 setup software mac
  2. Description
  3. Cisco linksys e router setup download
  4. Cisco Linksys E1200 Wireless-N Router Firmware (Ver.1.0.02), Setup Software, User Guide
  5. How to Get Drivers & Other Support for Your Linksys Hardware

It's best to download drivers and firmware directly through Linksys, but there are several other places to download drivers too, with free driver updater tools being one of the easiest ways. If you are unsure of how to update the drivers for your Linksys hardware, this guide on updating drivers in Windows will give you an easy walkthrough of the process.

Many of the user guides, instructions, and other manuals for Linksys hardware are available on the Linksys support website. All of the manuals available at Linksys are in the PDF format. If you don't already have one, you'll need a PDF reader in order to open them. Linksys provides free technical support for products purchased within the last 90 days, at The Linksys customer service number is If you're not in the US or Canada, see this page for region-specific numbers.

Linksys's Contact Phone Support page is very helpful. Here you can narrow down what it is that you're calling about so that the phone call can be directed to the right part of tech support, speeding up the whole process. Categories: Router Networking Devices. Learn more Document the product information. Locate and write down the model and version numbers located on the underside of the router. The required information will be located near the Linksys logo on the bottom of the router.

Download the latest firmware update. Navigate to the Linksys manufacturer's main website and click the link labeled "Get Linksys Support. If your router does not appear in the list, try entering the product information in the search field located near the top center of the page. Scroll down to locate the downloads tab near the center of the page and click the link.

Click the pointer arrow next to the field labeled "Select hardware version. Select the first link, labeled "Ver. Click "OK" to save the file when prompted, and the download will be completed in a few minutes or less. The firmware update has been downloaded and saved to the system's hard drive.

Locate the default gateway for your Linksys Router on a PC running any version of windows. You will need to locate the router's default gateway in order to access the router's web interface. From the start menu, enter "cmd" into the search field. Click the Apple icon on the far left of the menu bar and select the system preferences option from the pull-down menu. Now select "Internet and Wireless" from the Network menu. Guess ya gotta hook up the cable line into your modem for the wireless to work, huh?

Omg…thanks for your help! And where do you type admin.

forum2.quizizz.com/si-con-mi-llanto-a.php

linksys e1200 setup software mac

Well this is what I learned after speaking to most of India tonight at Linksys support. Linskys does not support Mac products. None of their techs know Macs. I spoke to three different techs, one tried to give me an number for Mac support and a supervisor later said there was no number. The number the guy gave me is for smalldog electronics, go figure…. You can not password protect a Linksys router for a Mac. If you figure it out please let me know because I spent an hour deciphering what the tech was saying and finally remembring what they said when i spoke to them in December after I bought this thing.

From the wireless security page on the linksys page the tech support person they tried to help as much as they could you need to input a 10 digit number as a password in the line for key 1. You will have to plug in ethernet to get back online, go to the page and disable the security.. When I said I was getting intermittent connections the tech said you might have to restart the router each time.. After spending a long 3 hours trying to figure it out the first day I got it…I finally gave up on it.

I never got an ethernet cable with my linksys box…is it different from any other ethernet cable? After you plug in the ethernet cable into the linksys device, where do you plug in the second ethernet cable for the computer? To answer your questions: 1. Pick any of the ports, All should work equally. I have a wireless PC network at home cable setup with 1 laptop and 2 desktop PCs — one ethernet connected, the other one using wireless card — all on XP.

I want to do work from a remote location using an iBook.

Description

All they have at the shop is dsl. So I set the iBook up using the dsl link making sure everything work — internet, emails, etc. Then took the iBook home and plugged it into the linksys wireless port 2 and guess what? It works perfectly. I wanted to try cloning my powerbooks MAC address. I am new to the mac-world …just bought a Mac mini. Also have problem setting up the Linksys hardware. I feel your pain! After being on the phone for almost 8 hours back and forth.

My linksys is not working. Spoke to 5 different people from linksys and 4 from apple. They all loved to sent me back and forth. Well after spendig some quality time with the MAC pro he said my mac was perfect which i belive since I have used my comp at work and in different networks for the past two weeks and it worked just fine with airport. Today i will stop by a starbucks or apple store just to double check that i can go in the network and use the internet.

Before I created a secure network my comp was able to use the internet but it was really slow and it would work whenever it wanted. Anyhow i will try to use the advice from all of you guys.. Good News….. I found some information that might be helpful for all you. I was able to get my internet working. I have a mac powerbook G4 and a PC laptop after doing some research i found out that if you are using the router wrt54g v6 or v5 you should not upgrade to the new firmware which is 1. I did the set it up and went wireless on both computers..

Macworld Categories

Nothing has worked. Most people seem to be beyond this point. Can I get some more suggestions of what to type in the empty fields? I had a similar problem of having no luck with admin as name or password and no luck with the Linksys support people, who helpfully told me to find a friend with Windows and use their machine.

Uh, no. Maybe I changed the default password? If there is anyway to reset the whole process that would be helpful. I also forget what worked last time.

Cisco linksys e router setup download

Hey, im glad i found this site. I have a question thats the same as A. After reading the tips here, and only then following the instruction on the linksys site particular to my router was I able to get things working. Many thank to the posters here. Linksys can work with Macs, but their documentation is very poor. The wireless internet was working fine for the last 2 months but since the last 4 days Safari on both Macs is not accessing the net.

The network connection shows that the computer is connected to the internet. Have spent many hours with Linksys support but no luck. Any help would be a life saver. Ok I have tried every day after work for almost a month to get my Linksys router to work and nothing. I get everything set-up or so it seems then I try getting on to the internet and nothing! Could not connect. Anyone have Step by Step directions for people like me that are wirelessly inept?

Like i get the part about setting it up and changing the network name etc. At the point when the online instructions tell you to type in a passphrase, DO NOT type in a passphrase. Then, after saving these changes, etc, when connecting via airport from the laptop, type in that 10 digit you generated—BUT FIRST insert a dollar sign.

Thanks to all these forums online I got mine to work. Save changes. Oh and I browse in Safari and no issues with that. Just make sure your Firmware Version is: v1. This should work. Unplug the modem, then the router. Wait 5 seconds and plug in the modem. Wait til you have solid lights then plug in the router. It should work now. Hope this helps someone. I just spent 3 hours figuring this one out. Linksys customer service is hit or miss. Tonight it was a miss. This is where their advice came into play…. Changing the MTU value to was really the best tip ever.

My macs now works like a charm, no hicups, no time-outs, and even my net-bank that used to not conect at all, now does it in a breeze. Thank you all guys. Have tried on both Safari and Firefox. Have tried blank, admin as well. In the instructions says that you should use one Ethernet wire to connect the router to the modem, and another, to connect the router to a computer used to configure the router , plugging in the cable to one of the four Ethernet slots.

Will that computer be ever connected to the router with that cable? Thanks for your time. The more I read these posts, the more confusing it is. Just for that; and when you say Network preference panel do you mean that literally, or do you actually mean that which is found in the Sharing preferences? I have Tiger. Ken, what steps did you take to connect your WRT54G to your airport? I have made a connection to the internet on my MAC and established a new network and password. However, I am stuck at that step. When I disconnect the ethernet cord and search for my network, it is there, but when I input my password, it does not accept it.

Can you or anyone else help guide me through this?? I have not been able to connect to the Linksys setup page for about 3 days now, getting ready to give up on it. When I have a few days to deal with the damn thing, I will try to set it up again. Until then the dumbasses can just use my network.

I am sure there is a step by step procedure for it, and it seems that many of the posters here have got it to work, but they all seem to have different ways of going about it. I wish there was one set procedure but it seems not, so screw it! I got to the linksys setup finally by setting a static ip, and I have set that up as best I can, now my router does not show at all. My time is not worth all this crap. But after a few days I was unable to connect once again.

Do I have to choose between having a secure wireless and actually being able to access it? My daughter is having the same problem. The WRT54G works flawlessly with 5 pcs.


  • linksys e1200 setup software mac.
  • CONTACT SUPPORT.
  • blazed font free download mac;

Plug it in and it works, in two separate environments. She powers up her MAC and is connected just fine, with a full reading on the power level indicators. Within 20 minutes, her power levels drop down to half of what they started out at, and the entire network comes to a crashing halt. Does anyone have any idea what might be causing this?

Thanks in advance for your input. Garrick, I just bought this wireless router so i could use my Inspiron laptop anywhere in the house. Setup went find. I bought this router yesterday and had a very flustering time getting it to work on either my G4 for Macbook, so today, i started anew… went to the Linksys site, downloaded and installed the latest firmware, spent about 30 minutes reading how to connect it to my cable modem etc.

I apparently needed to clone the mac id in the routers set up area via Then I set up a wep2 personal security login — that finally worked. Now both are connecting and have been up for hours, working flawlessly. My new iMac suddenly will no longer connect to our wireless network.

Shows a decent signal strength. The router and modem are in a separate building we are on 5 acres — but this whole setup has worked beautifully for months — now suddenly this mysterious quirk with the iMac. Where lies the problem? When I lugged the iMac to the bulding with the router, it connected just fine! Lee and MayMay — check your firmware if it is current. I have the same issue. I just bought a new macbook, and I bring it home, the wireless connects, and then the whole thing crashes when I open certain programs.

When I direct connect with someone through Adium it crashes the internet. Also when I open iTunes, the internet crashes. But if it disconnects I have to switch off the router and modem, turn them back on, and then manually connect to the internet through the PC that the router is connected to. It never works the first time, and I usually have to mess with it for 20 minutes each time it disconnects. But its ridiculous and frustrating. It disconnects everyone on the network, and just crashes the internet, even on the main PC.

Based on what I read here, though, it seems linksys blows for macs, and I might just look into the airport base station…. As soon as we connect my G4 powerbook, the whole thing crashes, usually within 5 to 10 minutes, and has to be restarted. The linksys tech people have had me configure the network in a million different ways tho always DHCP… , and once had me replace the router— and now they keep wanting to replace the router again!

Thanks to everyone here, I am finally able to connect to internet through my linksys router from my new iMac. I was prepared to go through a long and painful process, but I was lucky enough to find this site which has saved me a lot of time. The suggestion I used thats working for me is From dave December 27th, Didnt put in any passphrase, just fill in the key directly. After reboot everything, modem, router, iMac. I was able to connect to my network wirelessly using AirPort. This is only for Mac. The pc i have in the house just need regular WEP password.

Another thing I notice, which is something ppl might think is common sense but I didnt, and maybe some other ppl didnt pay attention. I am a first time Mac user, actually just get my new iMac last Thursday, so you might all know this already. That should make sure you can connect wired and wirelessly.

Hope this has helped someone. Thanks for the insite. I think someone may have touched on it here. The problem is with the lean firmware that Linksys supplies with the WRT54x. The router is simply not issuing an ip to yourMac. Upgrade the firmware on the device to a third-party version. However, Linksys cripples it with a junky firmware.

This Mac problem is another example of this. I had my wife bring home her ibook G4 1. In absolutely no time I was surfing on the iBook. Okay, my turn. Now, after many weeks of battle with the router and my ISP, I have finally gotten the computer to connect to the router and the router to the internet -so I know all my router settings are essentialy correct. If you have a pc already connected to the router go to start-run-cmd type ipconfig and change yours address. I just got the WRT54gs v5.

Should I have connected via DHCP — in that case, how I tried all combinations of turning off the computer, than swithing on modem, router, and computer sequentially — nothing worked. Can anyone explain why this option is missing from my menu? However neither the Mac wired to the Router and modem nor the PC connected wireless can access the internet. Thank you all. It works. Also i figured how to reset the password to access the setup page of the router.

Great ideas and good stuff here. Anyway , my story. The router works perfectly in B and G mode but there are some things u need to set up correctly. Clone mac address. This is needed as a lot of ISP match a user id to a mac address. You need to clone the mac address into the router so regardless of who logs onto the network the router mac address is the one your isp sees.

I use PSK personal security. All u do is type in a passphrase in the wireless security set up page and then enter the same passpgrase when Airport asks for it. Remember to click remember password at this time and from now on Airport will log on automatically. I have being using this security since buying my Macbook and had no problems at all. IP addresses. This is probably the area that is the biggest problem for most people..

I use DHCP and set range from This allows 10 users oon my network. The issue thst causes a lot of problems is that people are using macs and win machines that they use to connect to a variety of networks that alll use different IP ranges. If all the machines on your network are not in the same range with the same subnets yoou will get all sorts f problems like loosing wireless conectivity, loosinf internet etc.

If you use your computer in more than 1 location yu need to use the Location tab. This is a great system that mac os x as it allows u to have different settings for networks in different locations. For mac users the network assistant is very helpful in helping u to set the networks up. I use multiple networks because of my wprk and depending upon where i am i just change the location.

Again I have been using this system for over a year now and have had no problems. Hope this info is of sone use to you all and yes, Linksys support is pretty sad. The issue was that the firmware I had in the router 1. I bought the WRT54G router to run with my cable modem. The plan was to leave my iMac wired and use my PC laptop wirelessly. Plus a Vonage phone thrown into the mix.

Linksys E1200 setup

I read this entire thread before getting started, and ended up having no problems. My firmware was version 8. The iMac immediately connected! Maybe someone else can explain the reason behind this, but it worked for me. Thanks to all for your tips and advice.

Cisco Linksys E1200 Wireless-N Router Firmware (Ver.1.0.02), Setup Software, User Guide

I followed all of these steps with my new imac and my wrt54g router. I got everything setup. Got a network name and password. I can not get this router to send an internet signal to anything. Been at this for 6 hours now. What do I do?! I know have one iBook and one Dell connected via Ethernet cables. Anyone have suggestions? Wow, thanks to everyone who posted. I had the same problems, so went to Best Buy and set up an appt. I pay stupid! Wading out to unchartered waters now.. I have an airport extreme network.

Use a pc wirelessly, and my mac g4 is connected via an ethernet cable. Just got a slingbox, need another router port to connect the slingbox. What is the best method to connect everything? DSL modem, to a linksys router, to my airport extreme? Any help would be appeciated. Correction: Slingbox. Now my only problem is everytime I put my iBook G4 to sleep and open it back up again, I have to manually select the Airport Network and enter the password, before I can connect, which is a pain. Does anyone have any idea why this is happening and how I can fix it??

How to Get Drivers & Other Support for Your Linksys Hardware

I have a eMac os X and ive been trying for weeks to get this Linksys WRT54G set up and its saying im connected to the internet but ever time I try to pull up a website it says Internet cannot be found… Can someone please send me step by step instructions for a computer idiot?!?!? Im about to bash it with a ball bat here in a few hours if I cant get help… Aric gmail. While searching the internet, I found this site and it was a lifesaver! I followed all your directions but for some reason when I enter in the password that is saved on the lynksys interface it does not work. I think I have the latest firmware on my computer and I think I have followed all the instructions but no luck.

I can connect to the network wirelessly, but I am having signal problems, one second its good and the next second its dropped. The PC in the house has no signal problems at all. Excellent info on how to setup this system. Bought it today and was wondering where the MAC setup portion was so I googled it and came across you article. Thanks so much. Instructions are very easy to follow.

Life saver. It worked at first, but then an hour or so later it refused to load anymore. Could someone give me a hand? Email me at themadviolinist gmail. I would be immensely grateful. Hey, I have a Mac, but my brother has a PC and we share internet connections. If I make this switch will he be shafted on wireless?

Or will he still get the wireless with no problems? This worked for me. I was able to set up the network from my Windows PC. It took me a while to figure out what to enter on the Mac when it prompted me for a network password. Hi there, does your set up guide work for a MacBookPro?